Syrup Cooking Equipment

Syrup Cooking Equipment, also known as steam pot, cooking pot, or syrup making machine. Usually consists of the pot and feet. Pot body is a double structure composed of inner and outer spherical form pot body composition, mezzanine pass into the steam heating. There are fixed, tilting, stirred and other styles. Sandwich pot having a heating area, high thermal efficiency, uniform heating, the liquid material boiling time is short, easy to control the heating temperature, good looks, easy to install, easy to operate, safe and reliable. Sandwich pot widely used in various food processing, can also be used for a large restaurant or canteen soup, cook, stew, porridge like food processing to improve quality, reduce time, improve the working conditions of good equipment. Pot sandwich electrically heating, steam heating, gas heating mode. Tilting, vertical sandwich pot. HTF interlayer pot. With stirring, scraping the bottom of the pot stirred sandwich. Canteen porridge, wok. Sandwich pot can be used for food processing, braised pork, tasty, boiled, sugar, cooking, jams and pastries.

This syrup cooking machine uses gas for energy, has a beautiful appearance, durable, energy efficient and easy handling characteristics. Burner burn-resistant cast iron made of high thermal efficiency of combustion. The whole structure is compact and reasonable design, small footprint, high degree of standardization of parts, easy maintenance and maintenance. Worm rotatable lever device uses 3600 to facilitate investment or removing food. This machine is suitable for restaurants, food processing, bakery, condiments, snack foods, and other fields.

Tips when you use syrup cooking equipment:

1, First to check before using electrical lines, power leads should be well grounded, when you first turn on the power, you should check whether the equipment enclosure leakage. To effectively grounded enclosure, wiring should be strong, if found leakage, should immediately check the electrical lines, to be troubleshooting, to re-energize.

2, The agitator should be no-load operation for ten minutes, if no abnormal noise can be put into apply.

3, When the device is prohibited in the work, put your hand into the pot, to avoid danger.

4, If the operation failed, no parking and other failures, should be promptly cut off the power to check, to be back to work before troubleshooting.

5, The initial use of the gear unit should be injected into oil.

6, The outer side of the pot set oiling valve and the exhaust valve each, before using the machine stable place, after installation please oiling valve and the exhaust valve is closed.

7, When heated, do not short of oil transmission, to prevent electrical burn.

8, The use of pot can only tilt forward 90 degrees, the former must first power tilt and stop the agitator.

9. Do not touch the pot temperature is high.

10, Based on usage every two weeks to one month must view the HTF oil level before use.

11, Outer and not close like corrosive acid, to prevent corrosion oxidation.

12, Tilting pan sandwich should be checked prior to use lubricating moving parts is good, it should be filled with grease cup oil and the turbine, the engagement of the worm, into the amount of grease.