Instructions of Commercial Peanut Skin Remover Machine

Instructions of Commercial Peanut Skin Remover Machine:

1.The machine is 220 V, 50 Hz, peeling motor power 0.37 kW(two sets). The fan power is 0.55 kilowatts.

2.After connecting the power, check the the peeling roll and fan turned to whether it is consistent with the direction.

3.After starting the machine, running for one minute, without exception, poured the peanut into the hopper.

4.Two L-shaped screw in front of the peeling machine, you can turn the screw to adjust the speed of the material, and can be adjusted according to the actual situation, such as the material too quickly may cause peeling is not clean, the material is too slow peanuts wear too much .

5.The clean-up time, use a brush to clean up peeling sand roll to 3-4 days to prevent too sticky peanut powder on peeling roller, affecting peeling effect.

6.Bearings should conduct regular butter filling.