Dry Style Peanut Peeling Machine|Machine to Remove Peanuts Skin
Katherine / 
09 May,2017
This is Dry style peanut peeling machine can be used to remove the red skin of peanuts. Usually, the peanuts will be roasted before peeled. Capacity range from 200-600kg/h.
Working principle of dry style peanut peeling machine:
To combat, rubbing the main steel bar or steel bar concave plate structure, to squeeze, rubbing the main rubber roller or rubber floating concave plate structure two categories. The former has the disadvantage of high peanut fragmentation rate, the latter shelling efficiency and the rate is not high. Peanut peeling machine with rack, fan, rotor, single-phase motor, screen (with two sizes), into the hopper, shaker, triangular pulley and its drive belt and other components. After the normal operation of the machine, the peanut quantitative, uniform, continuous into the hopper, peanut in the rotor repeatedly hit, friction, collision, peanut shell broken. Peanut and crushed peanut shells in the rotor under the rotating wind pressure and blow, through a certain diameter of the screen (peanut first threshing with large holes in the screen, after the selection of small fruit into a small hole screen Secondary peeling), then, peanut shells, particles by the rotating fan of the role of blowing, light peanut shells were blown out of the body, peanut particles through the screening of shaker to achieve the purpose of screening.
Product advantages:
1, The design structure is reasonable.
2, Smooth operation, long life, high peeling efficiency, good quality
3, This dry stype peanut peeling machine can be used in multiple combinations, can be completed feeding, peeling, suction skin, picking, vacuum, packaging, water operations,
4, The peeling quality to achieve export standards. Mainly used for milky peanuts, peanut butter, peanut milk, peanut granules and other production before peeling.
5, High automation procedures, broken lunar high, low noise, no pollution and so on
6, This dry style peanut peeling machine is with a vacuum device and vibrating screen, vacuum device can absorb peanut red skin, shaker can effectively remove the peanut bud, which is separated into the ideal peanut half tablets.
Precautions:
1, Peanut peeling machine during the operation, should always pay attention to the speed of the machine, sound, temperature is normal.
2, Each finished a variety of varieties or one day after the completion of work should be shut down to check whether the various parts of the overheating, fastening screws at all parts, whether the loose pin, if found loose should be fastened, especially high-speed parts.
3, raw materials baked after the cool, the temperature maintained at room temperature.
4, no stones and other debris, to prevent damage to the sand roller.
