What Machine Should I use to Make French Fries?
Katherine / 
14 Apr,2016
To make french fries is neither simple nor complicated. What machine should one use to make french fries.
Gelgoog company manufactured a total set of Automatic French Fries Machine for marketing need.
1. Pre-Washing Peeling Machine: This elevator will take the potato to pre washing machine to wash and remove the mud on the surface. Motor working speed is adjustable.
2.Sorting Conveyor: After potato peeled, the potato will come into the sorting conveyor. Then can sort the unqualified potato,potato is not peeled well.If the the potato is not peeled well,then process it.
3.Potato Chips Cutting Machine: After sorted well, qualified potatoes will be put into the cutting machine. It can cut continuous.
4. Impurity Removing Machine: After the potato chips finished cutting, elevator will send potato chips to the Impurity Removing Machine. To adjust the distance between rollers, general it is 4mm soft brush roller. Potato chips will go down under working of brush roller. If the size of potato chips is less than 4mm, it will leave out.
5. Rinsing Machine:After the potato chips coming from the Impurity Removing Machine, the qualified potato chips will drop the Rinsing machine directly.
6. Blanching Machine: After rinsed, potato chips will coming into blanching machine, this blanching machine is adopts with electricity heating. Water temperature is controlled, all material are made of stainless steel 304, all bearings are Stainless steel 304, and stainless steel 304 bearing seat.
7. Vibrating De-watering Machine
After blanched, potato chips will be sent to Vibrating De-watering Machine, with frequency vibrate to remove the water on the surface.This machine is made of Stainless Steel 304,thickness of 3mm. Superior stainless steel 304 tube,vibrate motor of 0.25kw,amplitude is adjustable.
8.Air De-watering Machine: After Vibrating dewatering machine, the potato chips will coming into the air de-watering machine, thus the water will remove completely.
9. Frying machine: This machine is made of pure oil process technology, it is with dynamic filting system, it can filt and discharge the residue automatically to make sure the qulity of the oil. All made of Stainless Steel 304, Power of 2.2kw frequency control speed motor, three parts to control temperature, mesh conveyor width of 1200m ,with elevator function automatically. It will be easier to clean. It is with double layer mesh conveyor, upper and down conveyor all frequency control, oil temperature is adjustable from normal temperature to 300 centigrade. The electrical is from Schneider or Omron.There is not oil adding port.
